Stainless Steel

These enclosures have been specially designed for the chemical, oil and food and beverage industries, among others, which are particularly demanding in terms of hygiene and resistance to corrosion. High resistance to corrosion. 304L and 316L stainless steels provide the best solutions for applications in extremely demanding environments. Scotch-Brite® brushed finish as standard. Micro-beaded or painted finish (on request). Chrome-plated escutcheon. Invisible weld points. Perfect polishing.

Customisation

  • Machining and cut-outs.
  • Special dimensions.
  • Accessory installation.
  • Special finishes: painted and micro-beaded.
  • Production according to your specifications.
The high quality of the standard finish enables very easy maintenance while avoiding contamination. The hygienic feet made from 316L stainless steel, 100 mm and 200 mm high, make it easier to clean under the enclosures.

Stainless Steel: S3X

Stainless Steel S3X Enclosure from The Enclosure Company

These enclosures have been specially designed for the chemical, oil and food and beverage industries, among others, which are particularly demanding in terms of hygiene and resistance to corrosion.

  • Two types of materials, with Scotch-Brite® brushed finish, are available:
    • AISI 304L
    • AISI 316L
  • Two wall-mounting enclosure versions are available:
    • With plain door
    • With glazed door, Securit® glass, 4 mm thick.
  • Protection rating of IP 66 for all single enclosures with single door and glazed door, IP 55 for the double door enclosures, according to IEC 60529.
  • Resistance to external mechanical impacts:
    • IK 10 for the solid-door enclosures
    • IK 08 for the glazed-door enclosures
  • Thickness: 1.5 mm.
  • Single-piece body (cross-shaped structure). Gutter-shaped front profile.
  • 4 rear studs for fixing the material.

  • 2 cut-out vertical profiles on the door (from a height of 600 mm), with drill holes with a diameter of 4.25 mm and a pitch of 25 mm for installing accessories.
  • Door strengthening frame (from a height of 1000 mm), cross-section of 20 mm 3 15 mm, with drill holes with a diameter of 5 mm and a pitch of 25 mm.
  • Standard lock with 3-mm double-bar lock (chrome-plated zamak).
  • 2 locking points for heights of more than 500 mm or three points for two-door enclosures.
  • Stainless-steel hinges screwed to the body of the enclosure. They make it easier to remove and invert the door. Opening angle: 120°.
  • Polyurethane gasket.
  • M6 3 16 screws on the door and on the body, allowing equipotential connection between the earth connections (on request).
  • 4 holes for fixing to the wall directly or with the help of mounting lugs (on request), blocked by sealing plugs.

Certification

  • IEC 62208
  • UL 508A
  • CAN/CSA 22

Order Symbol Code Dimensions
(length x width x depth)
Description
NSYS3X3215 300x200x150 1 door, single lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X3215H 300x200x150 1 door, single lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X302515 300x250x150 1 door, single lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X302515H 300x250x150 1 door, single lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X3315 300x300x150 1 door, single lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X3315H 300x300x150 1 door, single lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4315 400x300x150 1 door, single lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4315H 400x300x150 1 door, single lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4320 400x300x200 1 door, single lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4320H 400x300x200 1 door, single lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4320T 400x300x200 1 doo, single lockk 316L stainless steel enclosure, glazed door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4420 400x400x200 1 door, single lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4420H 400x400x200 1 door, single lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4620 400x600x200 1 doo, single lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X4620H 400x600x200 1 door, single lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X5420 500x400x200 1 door, double lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X5420H 500x400x200 1 door, double lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X5420T 500x400x200 1 door, double lock 316L stainless steel enclosure, glazed door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X6420 600x400x200 1 door, double lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X6420H 600x400x200 1 door, double lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X6420T 600x400x200 1 door, double lock 316L stainless steel enclosure, glazed door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X6625 600x600x250 1 door, double lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X6625H 600x600x250 1 door, double lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X7525 700x500x250 1 door, double lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X7525H 700x500x250 1 door, double lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X7525T 700x500x250 1 door, double lock 316L stainless steel enclosure, glazed door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X8625 800x600x250 1 door, double lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X8625H 800x600x250 1 door, double lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X8625T 800x600x250 1 door, double lock 316L stainless steel enclosure, glazed door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X8830 800x800x300 1 door, double lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X8830H 800x800x300 1 door, double lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X10830 1000x800x300 1 door, double lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X10830H 1000x800x300 1 door, double lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X10830T 1000x800x300 1 door, double lock 316L stainless steel enclosure, glazed door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X101030 1000x1000x300 2 door, 3 point locking 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X101030H 1000x1000x300 2 door, 3 point locking 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X12830 1200x800x300 1 door, double lock 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X12830H 1200x800x300 1 door, double lock 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X121030 1200x1000x300 2 door, 3 point locking 304L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.
NSYS3X121030H 1200x1000x300 2 door, 3 point locking 316L stainless steel enclosure, plain door. 304L stainless steel canopy & plain mounting plate available.

Stainless Steel: S3XEX

Stainless Steel S3XEX Enclosure from The Enclosure Company

Aesthetics:

Stainless-steel enclosure with no cut-out. Scotch-BriteĀ® brushed finish. Monobloc body with a cross-shaped structure.

Choice:

Plain door: 7 references. Plain mounting plate. Silkscreened mounting plate. Microperforated mounting plate. Telequick mounting plate. DIN rail chassis.

Solid and sealed:

Resistance to external mechanical impacts: IK10. Protection rating: IP66. Polyurethane gasket. Gutter-shaped front profile.

Smart:

3-mm double-bar lock as standard. Door rails cut-out with a pitch of 25 mm allowing accessories to be mounted on the door.

Easy:

The 4 fixing holes are blocked by four crimped blind nuts. The door can be easily removed and turned over to open towards the left.

Convenient:

Large variety of common accessories with the Spacial S3X range. Reusable packaging

  • 2 cut-out vertical profiles on the door (from a height of 600 mm), with drill holes with a diameter of 4.25 mm and a pitch of 25 mm for installing accessories.
  • Door strengthening frame (from a height of 1000 mm), cross-section of 20 mm 3 15 mm, with drill holes with a diameter of 5 mm and a pitch of 25 mm.
  • Standard lock with 3-mm double-bar lock (chrome-plated zamak).
  • 2 locking points for heights of more than 500 mm or three points for two-door enclosures.
  • Stainless-steel hinges screwed to the body of the enclosure. They make it easier to remove and invert the door. Opening angle: 120°.
  • Polyurethane gasket.
  • M6 3 16 screws on the door and on the body, allowing equipotential connection between the earth connections (on request).
  • 4 holes for fixing to the wall directly or with the help of mounting lugs (on request), blocked by sealing plugs.

Certification

  • IEC 62208
  • UL 508A
  • CAN/CSA 22

Order Symbol Code Dimensions
(length x width x depth)
Description
NSYSMX141030 1400x1000x300 2 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX16840 1600x800x400 1 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX18640 1800x600x400 1 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX18840* 1800x800x400 1 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX181240* 1800x1200x400 2 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX181640* 1800x1600x400 2 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX20850 2000x800x500 1 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX201040* 2000x1000x400 2 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX201250* 2000x1200x500 2 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.
NSYSMX201660* 2000x1600x600 2 door stainless steel floor standing enclosure, brushed 316L stainless steel front, corner & side plinths available at 100mm & 200mm, plain mounting plate available.

Stainless Steel: SMX

Stainless Steel SMX Enclosure from The Enclosure Company

Stainless-steel grade:

AISI 304L and 316L as standard.

Finishes:

Scotch-Brite® brushed (standard). Micro-beaded (on request). Painted (on request).

Convenience and time saving:

Complete range of accessories for installation, cable management, etc. 316L stainless-steel plinth: easy cable entry. Reversible door opening to 120°. Padlock lock with key or form insert. Adjustment rails perforated with a pitch of 25 mm. Perforated reinforcement frame allowing accessories to be mounted on the door.

Sealing:

Protection rating of IP 55 (IEC 60529): complete protection against dust and water sprays. 3-point closures. Canopy (optional):
  • protects the sealing plane of the door
  • guarantees correct water drainage
  • no stagnation on the top.
Single-piece cable-gland plate with polyurethane gasket.

Compatible with the other ranges:

The mounting plates and other accessories of the Spacial SM standard metal offer.

Hygiene:

The high quality of the standard finish enables very easy maintenance while avoiding contamination. The hygienic feet made from 316L stainless steel, 100 mm and 200 mm high, make it easier to clean under the enclosures.

Robustness and durability:

Resistance to external mechanical impacts: IK 10 according to IEC 62262. 3 hinges made entirely from stainless steel.
  • Stainless-steel sheet floor-standing enclosure, 1.5 mm thick, folded and welded.
  • Two types of materials, with Scotch-Brite® brushed finish, are available:
    • 304L stainless steel
    • 316L stainless steel
  • Micro-beaded and painted finishes (on request).
  • Protection rating: IP 55 according to IEC 60529.
  • 1 Nema door, type 1, 2, 3, 3R, 4, 4X, 5, 12, 12K, 13.
  • 2 Nema doors, type 1, 2, 12K.
  • Resistance to external mechanical impacts: IK 10 according to IEC 62262.
  • Plain front door. Opening to left or right to 120° with reinforcement frame. Installed on 3 stainless-steel hinges. 3-point closure with handle made from painted zamak 5-mm double bar. Acceptable load of 50 kg.
  • Delivered with 4 mounting plate-supporting brackets.
  • Single-piece cable-gland plate delivered.
  • 316L stainless-steel plinths, optional heights of 100 and 200 mm.
  • Optional stainless-steel canopies.
  • Optional eyebolts.
  • Maximum load: 830 kg when slinging at 60°.
Order Symbol Code Dimensions
(length x width x depth)
Description
NSYSMX141030 1400x1000x300 2 front doors, 200mm or 100mm brushed stainless steel plinthes & mounting plates available.
NSYSMX16840 1600x800x400 1 front door, 200mm or 100mm brushed stainless steel plinthes & mounting plates available.
NSYSMX18640 1800x600x400 1 front door, 200mm or 100mm brushed stainless steel plinthes & mounting plates available.
NSYSMX18840* 1800x800x400 1 front door, 200ml or 100ml brushed stainless steel plinthes & mounting plates available.
NSYSMX181240* 1800x1200x400 2 front doors, 200ml or 100ml brushed stainless steel plinthes & mounting plates available.
NSYSMX181640* 1800x1600x400 2 front doors, 200mm or 100mm brushed stainless steel plinthes & mounting plates available.
NSYSMX20850 2000x800x500 1 front door, 200mm or 100mm brushed stainless steel plinthes & mounting plates available.
NSYSMX201040* 2000x1000x400 2 front doors, 200mm or 100mm brushed stainless steel plinthes & mounting plates available.
NSYSMX201250* 2000x1200x500 2 front doors, 200mm or 100mm brushed stainless steel plinthes & mounting plates available.
NSYSMX201660* 2000x1600x600 2 front doors, 200mm or 100mm brushed stainless steel plinthes & mounting plates available.

Stainless Steel: SFX

Stainless Steel SFX Enclosure from The Enclosure Company

Material and finishes:

Stainless-steel grade: AISI 304L as standard. AISI 316L (on request).

Finishes:

Scotch-Brite® brushed (standard). Micro-beaded (on request). Painted (on request). Convenience and time saving: Complete range of accessories for installation, cable management, etc. 304L or 316L stainless-steel plinth: easy cable entry. Reversible door opening to 120°. Padlock lock with key or form insert. Adjustment rails perforated with a pitch of 25 mm. Perforated reinforcement frame allowing accessories to be mounted on the door.

Resistance to corrosion:

High resistance to corrosion. 304L and 316L stainless steels provide the best solutions for applications in extremely demanding environments.

Sealing:

Protection rating of IP 55 (IEC 60529): complete protection against dust and water sprays. 3-point closures. Canopy (optional):
  • protects the sealing plane of the door
  • guarantees correct water drainage
  • no stagnation on the top. Single-piece cable-gland plate with polyurethane gasket

Hygiene:

The high quality of the standard finish enables very easy maintenance while avoiding contamination. The hygienic feet made from 316L stainless steel, 100 mm and 200 mm high, make it easier to clean under the enclosures.

Robustness and durability:

Resistance to external mechanical impacts: IK 10 according to IEC 62262. 3 hinges made entirely from stainless steel. Door reinforcement frame.

Technical characteristics

These enclosures have been specially designed for the chemical, oil and food and beverage industries, among others, which are particularly demanding in terms of hygiene and resistance to corrosion.
  • Enclosure made up of a structure, consisting of top and bottom, rear panel and vertical profiles.
  • Made from AISI 304L stainless steel with Scotch-Brite® brushed finish.
  • Available on request:
    • 316L version.
    • Micro-beaded and painted finish.
  • Protection rating of IP55 according to standard IEC 60529
  • High resistance to mechanical impacts: IK 10 according to standard IEC 62262
  • Plain front door. Opening to left or right to 120°
    • 3 stainless-steel hinges
    • 3-point closure with handle made from painted zamak, 5-mm double bar.
    • Acceptable load of 50 kg.
  • Single-piece cable-gland plate delivered
  • Optional 316L stainless-steel plinths, heights of 100 and 200 mm.
  • Optional stainless-steel canopies
  • Optional eyebolt
  • Maximum load: 830 kg when slinging at 60°

Basic composition

  • Structure consisting of top and bottom, rear panel and vertical profiles
  • Single front door, with reinforcement frame
  • Sash-bolt handle made from painted zamak, 3-mm double bar
  • 4 mounting plate-supporting brackets
  • Single-piece cable-gland plate with sealing gasket
  • Note: the panels and plinths can be installed and the enclosures can be assembled (on request).

    Order Symbol Code Dimensions
    (length x width x depth)
    Description
    NSYSFX18640 1800x600x400 1 door. Accessories available: Side panels, coupling kit, brushed 316L stainless steel plinths (100mm or 200mm), mounting plates
    NSYSFX18840 1800x800x400 1 door. Accessories available: Side panels, coupling kit, brushed 316L stainless steel plinths (100mm or 200mm), mounting plates
    NSYSFX181240 1800x1200x400 2 door. Accessories available: Side panels, coupling kit, brushed 316L stainless steel plinths (100mm or 200mm), mounting plates
    NSYSFX20650 2000x600x500 1 door. Accessories available: Side panels, coupling kit, brushed 316L stainless steel plinths (100mm or 200mm), mounting plates
    NSYSFX20840 2000x800x400 1 door. Accessories available: Side panels, coupling kit, brushed 316L stainless steel plinths (100mm or 200mm), mounting plates
    NSYSFX20860 2000x800x600 1 door. Accessories available: Side panels, coupling kit, brushed 316L stainless steel plinths (100mm or 200mm), mounting plates
    NSYSFX201060 2000x1000x600 2 door. Accessories available: Side panels, coupling kit, brushed 316L stainless steel plinths (100mm or 200mm), mounting plates
    NSYSFX201260 2000x1200x600 2 door. Accessories available: Side panels, coupling kit, brushed 316L stainless steel plinths (100mm or 200mm), mounting plates

    Stainless Steel: SDX

    Stainless Steel SDX Enclosure from The Enclosure Company

    The Spacial SDX range of control desks offers all the functions required to set up a control station that meets the industrial or infrastructural needs of applications in harsh environments or in the food and beverage sector. Easy to implement, compatible with dialogue components, guaranteeing the security and protection of control devices, these control desks, with their range of dimensions, meet the strictest needs of their users. The association of a control desk with one or more consoles enables all combinations. Furthermore, the accessories are compatible with those of the Spacial range of steel control desks and floor-standing enclosures.

    Hygiene:

    The high quality of the standard finish enables very easy maintenance while avoiding contamination. The hygienic feet made from 316L stainless steel, 100 mm and 200 mm high, make it easier to clean under the enclosures.

    Sealing:

    Protection rating of IP 55:
    • complete protection against dust and water sprays.
    • Door and body gaskets made from polyurethane.
    • Single-piece cable-gland plate with polyurethane gasket.
    • Removable plates for concealing the free space left by the console.

    Resistance to corrosion:

    High resistance to corrosion. 304L stainless steel provides a great solution for applications in extremely demanding environments.

    Finishes:

    304L stainless steel with Scotch-Brite® brushed finish as standard.

    Convenient:

    The association of a monobloc control desk with one or more consoles enables all combinations. Complete accessibility to the inside of the control desk thanks to its design without intermediate crossbars. The desk lid and the console are equipped with pneumatic opening stays (opening to 75°) allowing complete access to the inside and preventing sudden falls of the console or the hinged cover. Equipped with adjustment rails for adjusting the depth of the mounting plate. Removable rear panel.

    Technical characteristics

    • Floor-standing enclosure in 304L stainless-steel sheet, 1.5 mm thick.
    • Protection rating: IP 55 according to IEC 60529.
    • Resistance to external mechanical impacts: IK 10 according to IEC 62262.
    • Locking by standard 3-mm double-bar lock (chrome-plated zamak).
    • Hinges made entirely from stainless steel.
    • With a height of 1000 mm and a depth of 500 mm, this range is available in 4 widths (600, 800, 1000 and 1200 mm).
    • Full accessibility from the front.
    • With removable rear panel.
    • These control desks are equipped:
      • with a pneumatic opening stay on the opening of the desk lid, opening to 75°
      • a single-piece cable-gland plate for cable entry
      • 2 perforated vertical rails on the desk lid for quick fixing of cables and trunkings.
    • They are equipped with 4 adjustment rails for adjusting the depth of the mounting plates with a pitch of 25 mm.
    • Furthermore, it is possible to install two mounting plates back-to-back, allowing the installation of a large number of devices, while conserving full accessibility from the front and from the rear.
    • The hinges allow the opening direction to change and the doors to be quickly removed, with an opening angle of 120°
    • At the top, these control desks are equipped with blanking covers for cable entry.
    This last point allows the installation of one or several modular consoles.

    Order Symbol Code Dimensions
    (length x width x depth)
    Description
    NSYSDX6 1000x600x500
    NSYSDX8 1000x800x500
    NSYSDX10 1000x1000x500
    NSYSDX12 1000x1200x500