Multi-Plastic

MBP-Enclosures correspond with the high requirements of the mechanical engineering, shipbuilding, galvanic and petrochemical industry. Besides good resistance to most solvents and acids, fibre glass reinforced Polyester is inflammable and self-extinguishing. The enclosures are preferably used as terminal enclosures or as command and information enclosures in chemically aggressive environments such as refineries or road tunnels.

• All enclosures fulfil protection class IP 66 in accordance with DIN EN 60529
• The cover screws cannot be lost and are made of stainless steel
• The enclosure is fixed outside of the sealing area with separated fixing channels
• Temperature resistance with neoprene seal: -40 °C to +110 °C
• Temperature resistance with silicone seal: -50 °C to +140 °C
• The neoprene cover seal is oil and petrol resistant
• Special seals, such as ones made of silicone, are available on request
• The standard enclosure colour is light grey, similar to RAL 7001
• Special colours are available on request
• Accessories: Optional accessories are listed in the table of sizes

MBM-Enclosures offer excellent properties for "packaging" electronic and electrical components as well as complete control systems. Thanks to the high UV-resistance of the material, these enclosures can be used in indoor areas and outside elements. Our MBM- Enclosures can be mechanically processed in a number of ways and there are almost no limits to customised surface design with silk screen printing and membrane keyboards. The enclosures are available with a grey or transparent cover

• All enclosures fulfil protection class IP 65 in accordance with DIN EN 60529 ? Standard sealing PUR-foamed
• Temperature resistance: -40 °C to +100 °C
• The cover screws cannot be lost and are made of stainless steel
• The enclosure is fixed outside of the sealing area with separated fixing channels
• The standard enclosure colour is light light grey, similar to RAL 7035
• Special colours are available on request
• An EMC version with copper paint and conductive cover seal is available
• Accessories: Optional accessories are listed in the table of sizes

MBT Enclosures offer excellent properties for packaging electronic and electrical components as well as complete control systems in indoor areas. Our MBT-Enclosures can be mechanically processed in a number of ways and there are almost no limits to customised surface design with silk screen printing and membrane keyboards. The enclosures are available with a grey or transparent cover (K).

• All enclosures fulfil protection class IP 65 in accordance with DIN EN 60529
• Standard sealing PUR-foamed
• Temperature resistance: -40 °C to +80 °C
• The cover screws cannot be lost and are made of stainless steel
• The enclosure is fixed outside of the sealing area with separated fixing channels
• The standard enclosure colour is light light grey, similar to RAL 7035
• Special colours are available on request
• An EMC version with copper paint and conductive cover seal is available
• Accessories: Optional accessories are listed in the table of sizes

IP 65 rated Series 2000 is a further development of the MBT-Enclosures made of ABS in an elegant, black design. Cover strips in different colours serve the purpose of concealing the cover screws, give added value to the enclosure appearance and allow individual colour design. Our Series 2000 Enclosures can be mechanically processed in a number of ways and there are almost no limits to customised surface design with silk screen printing and membrane keyboards. The enclosure cover is available optionally with a recess of 1.0 mm for the use of keyboards or front plates. There is also the possibility of mounting a PCB in the enclosure cover. The enclosures are available with a black or transparent cover (K).

* = cover strips
** = Membrane recess

• All enclosures fulfil protection class IP 65 in accordance with DIN EN 60529
• Standard sealing PUR-foamed
• Temperature resistance: -40 °C to +80 °C
• The cover screws cannot be lost and are made of stainless steel
• The enclosure is fixed outside of the sealing area with separated fixing channels
• The standard enclosure colour is black, similar to RAL 9005
• Special colours are available on request
• Cover strips are available in yellow, silver, red, pink, black and blue
• An EMC version with copper paint and conductive cover seal is available
• Accessories: Optional accessories are listed in the table of sizes

It doesn't always need to be grey! With our Multi-olour enclosures made of ABS we offer the possibility of designing the colour of your products and visually upgrading them even for small quantities. Multi-Colour-Enclosures offer excellent properties for packaging electronic and electrical components as well as complete control systems in indoor areas. Our enclosures can be mechanically processed in a number of ways and there are almost no limits to customised surface design with silk screen printing or membrane keyboards.

• All enclosures fulfil protection class IP 65 in accordance with DIN EN 60529
• Standard sealing PUR-foamed
• Temperature resistance: -40 °C to +80 °C
• The cover screws cannot be lost and are made of stainless steel
• The enclosure is fixed outside of the sealing area with separated fixing channels
• An EMC version with copper paint and conductive cover seal is available
• Colours on stock:
  
  • RAL 3020 / Red
  • RAL 1023 / Yellow RAL 5017 / Blue
  • RAL 9005 / Black
  • RAL 7035 / Light Grey
• Special colours are available on request
• Accessories: Optional accessories are listed in the table of sizes

Enclosures with membrane recess offer excellent properties for packaging electronic and electrical components as well as complete control systems in indoor areas. Our enclosures can be mechanically processed in a number of ways and there are almost no limits to customised surface design with silk screen printing or membrane keyboards.

• All enclosures fulfil protection class IP 65 in accordance with DIN EN 60529
• Standard sealing PUR-foamed
• Temperature resistance: -40 °C to +80 °C
• The cover screws cannot be lost and are made of stainless steel
• The enclosure is fixed outside of the sealing area with separated fixing channels
• The standard enclosure colour is light grey, similar to RAL 7035
• Special colours are available on request
• An EMC version with copper paint and conductive cover seal is available
• Accessories: Optional accessories are listed in the table of sizes

Electronic Connector Enclosures

Electronic-Connector-Enclosures with different plug versions made of flame-resistant and impact resistant Polystyrene are frequently used for industrial power packs and chargers. Plugs in Schuko, European, Swiss and French versions are available as options. Excellent stability is achieved with the groove and spring sealing and the base parts that open to the side allow fast and uncomplicated assembly of construction elements. The cover is invisibly screwed on from the underside in the standard version. Fixing from the top side of the cover is also possible as an alternative.

• All enclosures fulfil protection class IP 20 in accordance with DIN EN 60529
• Temperature resistance: -20 °C to +60 °C
• The standard enclosure colours: Base part dark grey similar to RAL 7012 / Cover part light grey similar to RAL 7035
• Special colours are available on request
• Versions with air slots, integrated Schuko-Plug or French version are available from stock
• Accessories: Optional accessories are listed in the table of sizes

Plug Types:

• ST* = Plug without earthing
• STE* = Schuko plug with earthing
• ST CEE* = French plug version with earthing
• ST CH* = Swiss plug version with earthing
• ST EURO* = Europe plug version without earthing DO* = Schuko-socket with earthing
• DO CEE* = French socket with earthing

Controller Card Enclosures

The practical Controller-Card-Enclosure MBRCA made of flame and impact resistant Polystyrene are particularly suited to small controls and used in measurement and control technology. The enclosures have two function compartments and an open front side with a recessed edge to fix an aluminium front plate. With the separate connection compartment cover, free access to the terminal connection is possible. Knockouts for PG inserts are available in the connection compartment wall. 7 x M3 threaded sockets are provided to fix circuit boards or assembly plates inside.

• MBRCA-Enclosures with plastic covers fulfil protection class IP 54 in accordance with DIN EN 60529
• MBRCA-Enclosures with aluminium frontplate (without cover) fulfil protection class IP 40 in accordance with DIN EN 60529
• Temperature resistance: -20 °C to +60 °C
• The standard enclosure colours is light grey, similar to RAL 7035
• Special colours are available on request
• Accessories: Optional accessories are listed in the table of sizes

Controller Card Enclosures

The new Controller-Card-Enclosure MBRC2 has a larger connection space and all versions are offered in protection class IP 65. Another advantage is the hinged membrane cover, which can also be combined with a transparent lid. Six different cover variations allow a large application range in the control system, measurement and control technology. Available as an option with or without preformed knockouts in the connection compartment.

• All enclosures fulfil protection class IP 65 in accordance with DIN EN 60529
• Standard material ABS (Polycarbonate available on request)
• Temperature resistance: -40 °C to +80 °C
• The standard enclosure colour is light grey, similar to RAL 7035
• Special colours are available on request

These Instrument Panel Enclosures are made of fibre glass reinforced Noryl and have been specially developed for measurement and display technology in accordance with DIN 43700. The circumferential guide grooves inside the enclosure result in universal applications for circuit board installations. A front frame for the use of different front plates such as aluminium or fibre glass is also available

• All enclosures fulfil protection class IP 43 in accordance with DIN EN 60529
• Temperature resistance: -40 °C to +100 °C
• The standard enclosure colour is black, similar to RAL 9005
• Special colours are available on request
• Different installation depths on stock
• Rear panel cutouts are available on request
• Accessories: Aluminium front plate, Translucent red filter plate, Plexiglas display, Rear panel, Front frame, Seals, Fixation clips

Multi-Euro-Card-Enclosures MBEU made of ABS are used for varied application options with circuit boards in European card format. The functional triple plug combination of front plates and enclosure base with the enclosure top offer perfect ease of assembly.

• All enclosures fulfil protection class IP 43 in accordance with DIN EN 60529
• Temperature resistance: -40 °C to +80 °C
• The standard enclosure colours: Base dark grey similar to RAL 7012, Cover light grey similar to RAL 7035
• Special colours are available on request
• Accessories: Optional accessories are listed in the table of sizes

Plug-Card-Enclosures MBZA with gold-plated contacts offer the possibility of direct contacting between the circuit boards and connection terminal. The enclosures are used in different areas for small control systems. The enclosure cover is made of Polystyrene, and the base of fibre glass reinforced Polyamide.

The following versions are available as alternatives: 12-pole = MBZA 12 = 12 connection terminals
16-pole = MBZA 16 = 16 connection terminals

• All enclosures fulfil protection class IP 40 in accordance with DIN EN 60529
• Temperature resistance: -20 °C to +80 °C
• The standard enclosure colours: Base black similar to RAL 9005, Cover light grey similar to RAL 7035
• Special colours are available on request
• Accessories: Optional accessories are listed in the table of sizes

MACRO-TAST Keyboard Enclosures with aluminium front plate are used for a variety of tasks in control and display technology. The enclosures are available to choose from in Polycarbonate or ABS.

• All enclosures fulfil protection class IP 65 in accordance with DIN EN 60529
• Standard sealing PUR-foamed
• Temperature resistance in ABS: -40 °C to +80 °C
• Temperature resistance in PC: -40 °C to +100 °C
• The cover screws cannot be lost and are made of stainless steel
• The enclosure is fixed outside of the sealing area with separated fixing channels
• The standard enclosure colour is light grey, similar to RAL 7035
• Special colours are available on request
• Accessories: Optional accessories are listed in the table of sizes

The ALPHA-BOX made of ABS is a functional electronics enclosure in contemporary design. This product convinces with varied assembly options for circuit boards and other electronic components.

• All enclosures fulfil protection class IP 40 in accordance with DIN EN 60529
• With an additional seal IP 65 can be reached
• Temperature resistance: -40 °C to +80 °C
• The standard enclosure colour is grey, similar to RAL 7032
• Special colours are available on request

The Quadro-Box made of ABS is a functional electronics enclosure in contemporary design. The triple plug combination of cover, front plates and enclosure base offer perfect ease of assembly for PCBs and other electronic components. A dual fixing system allows the user to choose between screw and snap-lock fixing for the individual enclosure components.

• All enclosures fulfil protection class IP 40 in accordance with DIN EN 60529
• Temperature resistance: -40 °C to +80 °C
• T he standard enclosure colour is light grey, similar to RAL 7035
• Special colours are available on request
• Front plates are available in plastic (standard) or aluminum
• Accessories: Optional accessories are listed in the table of sizes

Electronic-Enclosures MBPO in a shapely design made of impact resistant Polystyrene are particularly suited to packaging small controls and desk units. Excellent stability is achieved with the groove and spring sealing and the base parts that open to the side allow fast and uncomplicated assembly of construction elements. The cover is invisibly screwed on from the underside in the standard version. Fixing from the top side of the cover is also possible as an alternative.

• All enclosures fulfil protection class IP 20 in accordance with DIN EN 60529
• Temperature resistance: -20 °C to +60 °C
• The standard enclosure colours: Base part dark grey similar to RAL 7012 / Cover part light grey similar to RAL 7035
• Special colours are available on request
• Versions with air slots or isolated ground receptacle plug are available from stock
• Accessories: Optional accessories are listed in the table of sizes

8 or 11 pole Plug-Socket-Enclosures MBRE for varied application options in control technology. Two different installation depths and guide grooves in the cover provide scope for freedom of design. The top part of the enclosure is made of ABS and the base is Noryl.

• All enclosures fulfil protection class IP 43 in accordance with DIN EN 60529
• Temperature resistance: -20 °C to +60 °C
• The standard enclosure colours: Base black similar to RAL 9005, Cover light grey similar to RAL 7035
• Special colours are available on request

The MBRS-19 Control-Enclosure is a completely new enclosure concept and allows simple connection technology for up to 19 special cage clamp terminals from the company Wago. These can be clipped directly onto the enclosure base. A corresponding terminal strip contacts the board, which can easily be mounted into the enclosure cover.

Advantages of the new concept:

1. Freely accessible and large connection space
2. Pluggable cable entries
3. Advanced and screwless clamp technology
4. Quick exchange of measurement- and control technique without demounting the electrical connections and the housing base

• All enclosures fulfil protection class IP 42 in accordance with DIN EN 60529
• Temperature resistance: -40 °C to +80 °C
• The standard enclosure colours: Base dark grey similar to RAL 7012, Cover light grey similar to RAL 7035
• Special colours are available on request

Measure-Enclosure MEBO made of ABS is used as handheld-enclosure for a variety of applications. It has a recess area for membrane keyboards or other operating elements. Furthermore, there are various visual openings for digital displays and a design with side sliding switch. A battery compartment accessible from the outside is also available.

• All enclosures fulfil protection class IP 43 in accordance with DIN EN 60529
• Temperature resistance: -40 °C to +80 °C
• The standard enclosure colour is black, similar to RAL 9005
• Special colours are available on request
• Accessories: Optional accessories are listed in the table of sizes

Mobile-Enclosures MBMO made of ABS with rubberised soft touch sides not only feel comfortable in the hand, they also have a nicely shaped design and are suitable for a variety of tasks in measurement and control technology. The triple plug combination of cover, front plate and enclosure base offers perfect ease of assembly for electronic components. Covers offer a recess for membrane keyboards and a battery compartment (9V and 2 x Mignon) is available as an option.

• All enclosures fulfil protection class IP 42 in accordance with DIN EN 60529
• Temperature resistance: -40 °C to +80 °C
• The standard enclosure colours are black similar to RAL 9005 or grey similar to RAL 7035
• Special colours are available on request
• Accessories: Optional accessories are listed in the table of sizes

This IP 65 enclosure has two functional areas. Electronic components can be separated from electrical connection technology for example. The enclosures are available in Polycarbonate or ABS. As an option the Duo-Box is also available with a transparent cover (K).

• All enclosures fulfil protection class IP 65 in accordance with DIN EN 60529
• Standard sealing PUR-foamed
• Temperature resistance in ABS: -40 °C to +80 °C
• Temperature resistance in PC: -40 °C to +100 °C
• The cover screws cannot be lost and are made of stainless steel
• The enclosure is fixed outside of the sealing area with separated fixing channels
• The standard enclosure colour is light grey, similar to RAL 7035
• Special colours are available on request
• An EMC version with copper paint and conductive cover seal is available
• Accessories: Optional accessories are listed in the table of sizes