Electrical enclosure boxes & cabinets

TV Shield Enclosures

The TV Shield is a weatherproof and secure enclosure designed with the residential consumer market in mind. Ideal for both outdoor and indoor areas, The TV Shield’s lightweight universal design easily opens for a direct view of your TV, allowing you to watch, protect and secure any TV in almost any environment. The TV Shield universal enclosures protect TVs and video displays in residential and commercial environments worldwide.

High quality wall mounting enclosures. Pro Range.

A new generation of GRP Polyester cabinets!

These enclosures stand out as incredibly robust and are designed to last. Used by pro's across the industry, they are not the cheapest available for the dimensions, but they are a very worthwhile investment if budget permits.

For good quality at a slightly lower price point, check out our BJE-GRP range.

High Voltage Ex e and Ex nA Junction Boxes

High Voltage Enclosures

  • This range of stainless steel High Voltage Junction Boxes been have designed and developed over 40 years of supplying the oil and gas industries
  • Enclosures are available in various sizes with up to 8 incoming and outgoing cables with a max cable size of 800mm2 to accept 800A to 1090A and 11kV to 15kV
  • Bespoke sizes and designs including air purge (Ex p) for higher voltage application, and IP68 for permanent or temporary submersion
  • Optional extras include, separate enclosures/compartments for fibre optic cable terminations, heaters, air purging and IP68 underwater versions


Glass-fibre Reinforced Polyester enclosures and accessories

Glass-fibre Reinforced Polyester or GRP enclosures are light weight and robust. Their main characteristics are that they are UV resistant and extremely strong with an impact strangth similar to that of metal enclosures. As well as this they are non-corrosive which makes them ideal for installation outdoors or in harsh environments.

Units can be machined and customised to your required specification


MNX polycarbonate and ABS enclosures utilize world-class injection moulding technology. They are designed to house and protect all kinds of electrical components in the most demanding applications. The MNX includes more than 260 different variations.

Electric meter boxes

Key features

  • Weather resistant
  • Will not corrode
  • Suitable for domestic electric meters
  • Meter box key included


  • Fitted baseboard
  • Manufactured in glass reinforced plastic
  • Pre-drilled cable entry positions
  • Fire retardant to E.S.I Standard 12-3

Easy installation - cable entry on the face of the wall or via cavity

IP66 GRP ATEX Enclosures

These black polyester (GRP) enclosures are available in 4 popular sizes and terminal configurations to meet our customers urgent Ex requirements.

These enclosure are IN STOCK and available for rapid distribution.

  • All pre-assembled enclosures meet current Ex e, Ex ia and Ex ib requirements to EN 60079:2007
  • Rated to IP66 and T6 (T85°C) or T5 (100°C) temperature ratings
  • Ex certified, certificate number SIRA08ATEX3213

Please note all dimensions are external. For a more comprehensive overview, see our data sheet



DG Enclosures, control units for demanding environments have been developed in close co-operation with key customers. Unique design saves time in assembly and on-site installation.

GRP Floor Standing Enclosures

Floor-standing polyester enclosure

  • No electrical contact risks.
  • Suitable for indoor or outdoor use.
  • Resistant to harsh atmospheres.
  • Can be used in a large temperature range.
  • Easy to machine and the machining does not produce corrosion.
  • Halogen free.
  • Light weight gives an easy installation.
  • Long life lasting without maintenance.
  • Strong against shocks.
  • Version with canopy, for outdoor use, maintaining the quality of the seal.
  • Version with 65mm integrated plinth and open lower part for easy incoming of cables.
  • Large range of dimensions (40 dimensions !).
  • Choice of doors (plain, ribbed anti flyposting surface, glazed).
  • Several possibilities of installation (ground, on plinth, wall).
  • Coupling possibilities thanks to modular dimensions.
  • Locking system is out the protected volume.
  • Abroad number of composition accessories.
  • Mounting plates (metal or insulating material) or chassis for universal use or applications (VDI, modular distribution).
  • Customised service: colour, machining, mounting accessories, change of locks, enhanced depth.
  • Combination of the 4 versions with the 3 types of door and rear door instead of panel.

Floor standing mild steel electrical enclosures

Discover the new generation of Spacial SF suitable metal enclosures and Spacial SM compact enclosures


Tempo enclosures are easy to use because they are designed to save time and money in assembly and installation. Enclosures are fully compatible with the most common types of standard enclosure market. Plain cover offers lots of space for printing labels.

BoCube Alu

A new design and innovative features protect sensitive components even in challenging environments.

These Aluminium enclosures are available in seawater-resistant (SWB) or special EMC versions on request.

Bocube Enclosure - Pro Range

An innovative enclosure pro's love to use!

We are delighted to be offering the all new Bocube Enclosure Pro Range, a completely new approach to enclosure design which is set to change the game.

These innovative enclosures require no tools for use, opening up a world of possibilities. They quite literally define a new standard for pro enclosure installation!


PICCOLO range is especially designed to house push buttons, terminal blocks, motor starters and electronic devices. They are also ideal for mounting and protecting process control sensors and switches. PICCOLO range is available in polycarbonate and ABS.


EURONORD range is designed to house DIN-rail mounted terminal blocks and various types of sensors. EURONORD enclosures are available in polycarbonate, ABS, polyester and aluminium. There are more than 160 different off-the-shelf versions avaiable.


SOLID range is an excellent choice to house electronic and electrical components. It is also an ideal alternative to polyester enclosures. It is available with screw and hinge covers in both polycarbonate and ABS.

IP 68 Enclosures

The Enclosure Company is proud to announce a robust range of IP 68 enclosures at astounding prices. These enclosures are suitable for marine and other harsh environments and can be fully submerged in water.

We have a range of GRP enclosures in 9 sizes at IP67/68 (depending on requirement), and are able to manufacture IP 68 enclosures in stainless steel at larger sizes to order...


MCE - Modular Component Enclosures offer easy-to-use and practical functionality and design to house automation, control and switch gear components. MCE enclosures can be connected to each other with flange openings to build bigger panels. Cable entries are available in all sides. There are 5, 9, 14, 28 and 42 module options available as stock products. Bigger solutions are available upon request.

Stainless Steel

These enclosures have been specially designed for the chemical, oil and food and beverage industries, among others, which are particularly demanding in terms of hygiene and resistance to corrosion. High resistance to corrosion. 304L and 316L stainless steels provide the best solutions for applications in extremely demanding environments. Scotch-Brite® brushed finish as standard. Micro-beaded or painted finish (on request). Chrome-plated escutcheon. Invisible weld points. Perfect polishing.


  • Machining and cut-outs.
  • Special dimensions.
  • Accessory installation.
  • Special finishes: painted and micro-beaded.
  • Production according to your specifications.
The high quality of the standard finish enables very easy maintenance while avoiding contamination. The hygienic feet made from 316L stainless steel, 100 mm and 200 mm high, make it easier to clean under the enclosures.


The EK range is an ideal solution for installation type of applications with either single or modular enclosure solutions. EK range is available with flange openings providing several options to use a wide selection of accessories or connect enclosures to each other so as to form a larger enclosure panel.


An incredible range of enclosures, some available in a wide variety of colours, in ABS, Polyester or Polycarbonate, covering a range of applications from controller card, instrument panel and many other enclosures.


Polyamide hand held enclosure for MCR- and automation engineering, available for 'ex' applications as required.

  • Polyamide hand held enclosure for MCR- and automation engineering
  • Version with or without display opening
  • Prepared for acceptance of keypads/silicone switch mats
  • Optional EMC version with internal coating and EMC-seal


CAB wall mounting cabinets are manufactured of high impact resistance polycarbonate or ABS withstanding harsh industrial and outdoor environments. These cabinets are produced with hinged covers. Transparent cover options allow easy viewing of installed equipment and indicators. Glass fibre reinforced polyester cabinets are also available.


A range of Aluminium Enclosures for a multitude of applications, from Profile Enclosures to Instrument Panel and Keyboard enclosures, and much more.

Mild Steel Wall Mounted Enclosures

The Spacial S3D steel enclosure universal offer. Three steel enclosure definitions are available:

  • Enclosure with plain door.
  • Enclosure with plain door delivered with a galvanised plain mounting plate, not installed.
  • Enclosure with glazed door, 4-mm-thick Securit® glass.
Structured finish, epoxy-polyester powder, RAL 7035 grey colour.

Alubos Range

Universal extruded aluminium profile enclosures

  • 3 profile variants
  • 9 profile cross-sections
  • Standard lengths ex warehouse
  • Special lengths available at short notice
  • Functional diecast aluminium end covers
  • Good EMC shielding
  • Design seals in 5 colours
  • Wide range of accessories


CARDMASTER range is ideal for packaging instrumentation, measurement, monitoring and process control equipment. It provides two compartments - one for circuit boards and sensors with slots for printed circuit board insertion, and another one for terminal and wiring. All sizes are available in both polycarbonate and ABS.


EX enclosures are specially made for use in hazardous environments. They are designed, manufactured and tested to international standards. All certi? cates, such as ATEX, are issued by the manufacturer under license from a test authority. EX enclosures are made of either aluminium, polycarbonate or polyester.

Low cost ABS enclosures

These enclosures are manufactured from ABS techno-polymer, which ensures high impact resistance and strength. They are the ideal choice for housing electrical and electronic equipment of high value at low costs.

The variety of depth and shapes allow you to find the product that fits perfectly to your needs. Besides a full machining and customising service is available, to provide you with a finished product avoiding the problems of employing several sub-contractors along with all the hidden goods inwards inspection costs.

Arca range - high performance polycarbonate cabinets

High grade polycarbonate construction

  • Non corrosive for use in extremely harsh and demanding environments, offering a long-lifetime and excellent security
  • Easy to customise without complex tools
  • Low Voltage Directive 2006/95/EC up to 1500 VDC

Robust design

  • IP 66 ingress protection for peace of mind in wet and dusty environments
  • High impact resistance. Able to withstand contact up to IK 10
  • Strong hinge design to withstand regular door opening to 120° and the fitting of door mounting components


A selection of some of the finest explosion proof enclosures on the market


Ex e, Ex ia, Ex ib and Ex nA Stainless/Mild Steel Enclosures and Terminal Boxes

We have supplied CEX enclosures to many application areas including the onshore/offshore Oil and Gas industries. With the expansion of wave and wind power generation CEX enclosures can be found on underwater wave hubs and wind farms with connections up to 36kV and 2000 amps.

Roadside Range

Our PT GRP cabinet range offers our customers an extensive selection of set mould roadside enclosures that can be purchased directly from our stock.

PT1 and PT2 come fitted with a single door, all larger GRP cabinets in our PT range come with double opening front doors.

  • Composite GRP construction
  • Stainless Steel hinges
  • Cylinder night latch lock/ Hasp & Staple
  • IP54 protection
  • Half hour fire rating

Download a .pdf of our new ET range here.

Fire rated Enclosures

Available in aluminium or stainless steel, these enclosures are fully flame retardant and offer incredible protection for your equipment in the most hazardous of conditions.

Euromas-ABS/ Polycarbonate

Classic enclosure made of polycarbonate or lower-cost ABS

  • 36 sizes
  • 19 different M...V0 versions corresponding to UL 94 V0
  • All M versions are listed under UL file no. 196 706
  • Terminals and mounting on request
  • Fixing screws for DIN rails or mounting panels included in scope of delivery

Download detailed product information here.

Spacial Metal Enclosures

Steel industrial boxes

Discover the new generation of Spacial SF suitable metal enclosures and Spacial SM compact enclosures. These Stainless Steel Enclosures represent the highest quality on the market.


From design, to prototyping to mass production, we are able to offer you bespoke enclosure solutions of the finest quality at the very best rates. You have the idea, we'll take care of the rest.